3 panel craftsman interior door

[Corey Filkins]

My newest project is a three panel craftsman door for a new closet I put in my lower level. I am wondering if anyone has dimensions for such a door.

28 inch door out of red oak 1 and 3/8 thick. I am using 5 inch styles and a 9inch base. Wondering for the panel thickness?

Also how high for the narrow panels?

Ay help from other dor builders would be great.

Thanks in advance.

[lowell holmes]

See if these sites help. The midrail appears to be 50-58" from the bottom.



http://www.menards.com/main/interior-closet-doors/mastercraft-interior-single-doors/pre-finished-craftsman-style-3-panel-interior-prehung-door-36x80-lh/p-1773777.htm


http://www.craftsmandoors.com/interior.html

[Richard Shaefer]

Iv'e built a bucket load of these things.
Use 1/2" ply for the infill.
Top panel should be roughly square.
use 5 1/2" stiles, go thicker than 1 3/8" on the rails and stiles. I like to build-up the side rails out of 2 plies of 4/4 material and then plane/joint down to 1 3/4" thickness. The lamination is cheaper than solid stock and it's more resistant to warping over time.