Results 1 to 3 of 3

Thread: Finishing help

  1. #1
    Join Date
    Feb 2003
    Location
    Oak Harbor, Whidbey Island, WA
    Posts
    2,551

    Finishing help

    I have about 10 of these doors in different sizes & 3 drawer fronts to try to improve the looks of, the cabinets are in the rec center kitchen of 1 of the apartment complexes we manage. I really don't want to completely refinish them (time is short) but would like to clean them up & perk them up a bit. I have rubbed this one down with scotch brite which clean it up quite a bit but there were some areas that due to moisture the finish was thin.

    These cabinets are 27 years old. But in reasonable shape.

    So any suggestions???

    Thanks
    Attached Images Attached Images
    Last edited by Bart Leetch; 04-19-2005 at 3:37 PM.
    I usually find it much easier to be wrong once in while than to try to be perfect.

    My web page has a pop up. It is a free site, just close the pop up on the right side of the screen

  2. #2
    Join Date
    Aug 2003
    Location
    Upstate New York
    Posts
    414
    Bart, I bought some Formby's Build Up Remover, and it worked really well on an old music box that my Dad had given me. It dissolved the old dust, dirt, and oxidation residue very well. It did not remove any of the finish. Since your doors were in the kitchen, there may be a lot of grease/smoke residue on them, and this stuff should work fine. In any case, it wasn't real expensive and it is available at Lowe's in the same area as the Formby's finishing products (near the shellac in our store).
    "Be true to your work, your word, and your friend." -Henry David Thoreau

  3. #3
    Join Date
    Nov 2004
    Location
    Winterville NC
    Posts
    378

    Briwax

    Bart: I have used Briwax in it's many colors for a quick help. If something is wrong clear will remove color and permit you another try. Harry

Similar Threads

  1. finishing questions
    By George Pell in forum General Woodworking and Power Tools
    Replies: 1
    Last Post: 12-27-2004, 1:26 PM
  2. Finishing Room
    By Ken Fitzgerald in forum General Woodworking and Power Tools
    Replies: 29
    Last Post: 10-07-2004, 3:34 PM
  3. Finishing Drawers
    By Dennis McDonaugh in forum General Woodworking and Power Tools
    Replies: 1
    Last Post: 04-12-2004, 7:08 AM
  4. Finishing closet ?'s
    By Rob Littleton in forum General Woodworking and Power Tools
    Replies: 3
    Last Post: 03-15-2004, 12:23 PM
  5. What to do with this space? Office, finishing room, or ???
    By Matt Meiser in forum General Woodworking and Power Tools
    Replies: 11
    Last Post: 01-23-2004, 7:43 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •