Results 1 to 3 of 3

Thread: Cypress question

  1. #1
    Join Date
    Apr 2004
    Location
    East TN
    Posts
    385

    Cypress question

    I am currentyly building an outdoor bench made of Cypress. I know it is an excellent outdoor wood. but my question is this. Would you still put a finish on it, and if so, what? Also, will an exterior glue hold up on Cypress. I know on many types of wood you need to clean them with acetone, but I wasn't sure about Cypress. Thanks for any help you can give.
    Keel McDonald ><>

  2. #2
    Keel,

    I've made several adirondack chairs from cypress and used Elmer's polyurethane glue to make 1-1/2" thick pieces from 3/4". Haven't had any problems with it and have heard of others using Titebond 2 or 3 without any problems. I don't believe cypress has the oils in it like other woods that require cleaning with acetone first.

    I used Minwax Helmsman since it was the most readily available. I didn't want the chairs turning gray like unprotected wood does. When they are always outside, there's been some mildewing/wearing along the edges that I'll need to touch up. I know there are recommendations for some marine type products that might offer better protection.
    * * * * * * * *
    Mark Patoka
    Stafford, VA
    * * * * * * * *

  3. #3
    Join Date
    Apr 2004
    Location
    East TN
    Posts
    385
    Thanks Mark. The Titebond is what I used to make some 1 1/2 inch pieces. I think I'll leave the pieces natural, but thanks for the advice.
    Keel McDonald ><>

Similar Threads

  1. Lurker peering thru the door with a rail and stile question? (Long)
    By Chris Wilson in forum General Woodworking and Power Tools
    Replies: 10
    Last Post: 03-13-2007, 5:20 PM
  2. long time lurker question (sharpening turning tools)
    By John Daugherty in forum General Woodworking and Power Tools
    Replies: 7
    Last Post: 07-22-2004, 5:05 PM
  3. HI - New to this forum - got a question 'bout lathes
    By Matthew Dworman in forum General Woodworking and Power Tools
    Replies: 14
    Last Post: 06-01-2004, 10:38 PM
  4. Stupid CA glue question
    By Royce Meritt in forum General Woodworking and Power Tools
    Replies: 12
    Last Post: 01-16-2004, 5:35 PM
  5. Cypress
    By Jerry Todd in forum General Woodworking and Power Tools
    Replies: 6
    Last Post: 07-02-2003, 10:31 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •