Results 1 to 8 of 8

Thread: Just testing my signature

  1. #1
    Join Date
    Jul 2007
    Location
    Pleasanton, California
    Posts
    700

    Just testing my signature

    Did it show up?
    Greg Ketell
    "Permanent Turning Newbie" aka "Always trying something new"

    See my photo gallery here
    (in need of updating)

  2. #2
    why can't i use a BB code url as a signature?

  3. #3
    Join Date
    Jul 2007
    Location
    Pleasanton, California
    Posts
    700
    SMC doesn't like commercial links other than to supporters' sites and too many people were linking to their sites. It would be nice if there was a way to allow linking within SMC but I guess the forum software can't do that.

    Gk
    Greg Ketell
    "Permanent Turning Newbie" aka "Always trying something new"

    See my photo gallery here
    (in need of updating)

  4. #4
    Join Date
    Feb 2013
    Location
    Rapid City, South Dakota
    Posts
    112
    I see people adding a quote and a line of text with what kind of tools and shop setup they have. Including there name and company name. So i changed my signature so i could do this also and test it out.. ""Lets see if it works'" ""Closes eyes, Pushes Red Launch Button"
    Jesse M Anderson "SD Engraving"

    "Do not complain about anything to which you need not subject yourself"

    2 Epilog Mini 75 w, With Air assist and dual exhaust,
    8 Heat Transfer machine's,
    5 Heat transfer Hat machines,
    Wood Lathe, and wood working shop
    Sand Blasting Enclosure with accessories
    paint spraying setup


  5. #5
    Quote Originally Posted by Jesse Anderson View Post
    2 Epilog Mini 75 w, With Air assist and dual exhaust, 8 Heat Transfer machine's, 5 Heat transfer Hat machines, Wood Lathe, Sand Blasting Enclosure with accessories, And Paint Spraying Setup.
    Jesse that signature is just annoying, in my honest opinion
    colors and font are just not right...
    Carpe Lignum

  6. #6
    Join Date
    Feb 2013
    Location
    Rapid City, South Dakota
    Posts
    112
    I hope this caters to your standards of an acceptable signature. Thanks for the advice. I even changed my quote that i was reminded of in this particular situation...I changed the Text so it was smaller. edited the quote so that it was not so long. I will keep the colors. I am designer at heart. The only way i could add an artistic flare to each one of my posts.
    Last edited by Jesse Anderson; 03-02-2013 at 9:21 PM. Reason: Added a few conjunctions Be, Am, Is ,are , Was Were has have had
    Jesse M Anderson "SD Engraving"

    "Do not complain about anything to which you need not subject yourself"

    2 Epilog Mini 75 w, With Air assist and dual exhaust,
    8 Heat Transfer machine's,
    5 Heat transfer Hat machines,
    Wood Lathe, and wood working shop
    Sand Blasting Enclosure with accessories
    paint spraying setup


  7. #7
    Quote Originally Posted by Jesse Anderson View Post
    I hope this caters to your standards of an acceptable signature. Thanks for the advice. I even changed my quote that i was reminded of in this particular situation...I changed the Text so it was smaller. edited the quote so that it was not so long. I will keep the colors. I am designer at heart. The only way i could add an artistic flare to each one of my posts.
    I like that a lot better
    The light blue is hard to read, but that might just be my eyes

  8. #8
    Join Date
    Feb 2013
    Location
    Rapid City, South Dakota
    Posts
    112
    Yea any one using a computer on the internet with a normal white background needs to stay away from yellow, light blue, light green fonts. If my font was bumble bee yellow it would be impossible to read. So if any one needs to look at what a acceptable signature looks like. Just be less annoying then what my signature looks like. Its not to have things short and sweat and to the point. Not look like Richard Simmon's Sweating to the oldies Album cover.
    Jesse M Anderson "SD Engraving"

    "Do not complain about anything to which you need not subject yourself"

    2 Epilog Mini 75 w, With Air assist and dual exhaust,
    8 Heat Transfer machine's,
    5 Heat transfer Hat machines,
    Wood Lathe, and wood working shop
    Sand Blasting Enclosure with accessories
    paint spraying setup


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •