Results 1 to 1 of 1

Thread: second attempt with a new bit design

  1. 01-16-2013, 4:58 PM #1
    stan kern
    stan kern is offline Member
    Join Date
    Nov 2009
    Posts
    191

    second attempt with a new bit design

    this time i ran the blank with a 1/2 bit and the internal cut with a 1/4 bit ,this design of bits is good worth a try
    Its a clean cut and smooth
    http://youtu.be/44chxML9Pr0
    the diagram was scanned from a text and ediited with iullustrator and a bit more editting in aspire and a toolpath was created.
    I tried 3 software packages and illustrator and vector magic were the best to get this image on the table for cutting



    this is where i got the bits from
    FS Tool Corporation
    71 Hobbs Gate
    Markham, ON Canada
    L3R 9T9
    Tel: 905 475-1999
    Toll-free: 800 387-9723
    Fax: 905 475-6474
    Toll-free: 800 361-5010
    Attached Images Attached Images
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules