If you do, I have some questions. I test built an antenna with the structure out of scrap wood. This will NOT hold up to the elements, so I want to use something a little more permanent. I can get some 1 X 4 or 1 X 6 (actual .75 X 3.5 and .75 X 5.5 respectively. Do they plane down PVC trim to get to size like wood? ). http://www.homedepot.com/webapp/wcs/...1#.UQ_oSjmn9pU PVC is good because it is an insulator and does not conduct electricity. I know you can finish nail PVC trim onto a wood structure, but will it hold staples and screws like wood does? For this antenna, I will use part of the trim to hold some light weight wire small animal fencing a specific distance from the antenna whiskers. Also, how does this material react to being ripped? Do the ripped edges stay solid, or do they disintegrate over time? I know it won't have the slick finish, but will that create problems? Anything else you can think of would help. Jim.