Most of the software has a section where you can specify the import precision (in laserworks , its under config/file para setting) For plt (hpgl) precision , set it to the highest number and check the "smooth curves" box if it has one. Perhaps check if your software has this or something similar, maybe input config ...
Rodney Gold, Toker Bros trophies, Cape Town , South Africa :
3 x GCC 30w explorers. 3x GCC 30w Spirits. Roland 2300 rotary . 5 x ISEL's ..1m x 500mm CnC .
Tekcel 1200x2400 router , 900 x 600 60w Shenui laser , 1200 x 800 80w Reci tube Shenhui Laser
2x Gravo manual engravers , Roland 540 large format printer/cutter.
1600mm hot and cold laminator , 3x Dopag resin dispensers
The nicest thing about smacking your head against the wall is.....the feeling you get when you stop!
Moderator
IEHK 24X36, 60W Laser, Carvewright, Powermatic 66, Delta Radial Arm Saw, Woodtec 25" Drum Sander, Grizzly 18" Bandsaw, Delta 6" Joiner, Leigh Dovetail system and a ton of hand tools.
Posting Permissions
Reply With Quote