So using the lighting write up which was very helpful I did a lighting layout for my shop. The latest iteration incorporates a Combo machine (either MM, Hammer or Felder, just have to see who wants my business the most) and I utilized the lighting guidelines in the write up (at least I think, I did). I'm over 50 so looking for lighting levels closer to 100 FC. As In the example in the write up, the fixtures are 8' strips with (4) four foot tubes each (12 fixtures total). Seems like a lot of light to me but every one of my shops had poor lighting so I'm far from an expert on the subject. What do you guys think adequate or more like an emergency room and I should scale back? The overall area for the shop is 720 SqFt but I consider the area to be illuminated (adjusting for the DC, water heater, full height shelving etc) closer to 650 SqFt. Thanks for your thoughts!