Page 1 of 2 12 LastLast
Results 1 to 15 of 18

Thread: Needing font - Interlocking Engravers Font to use in Corel Draw

  1. #1
    Join Date
    Jan 2009
    Location
    Lexington, TN
    Posts
    96

    Needing font - Interlocking Engravers Font to use in Corel Draw

    I searched on this and found a previous thread inquiring but there was never an answer to the question. Several suggested different fonts but no source for this specific font - I have a local shop interested in letting us laser keytags that are personalized based on some she has found online. The font is listed as Interlocking Engravers Font and it seems many have it, but I have come up empty searching for WHERE to get it. I have Engravelab 8 and it is not in the fonts included with it, and so I beg the collective for help. Don't know if this is available in true type, but hope someone here can direct me.

    Thanks for any/all help!
    Doing What's Right Isn't Always Easy, BUT It's Always What Is Right

    Universal Laser ILS 12.150D (48"x24") with 60 watt single laser. Class 4 Module (pass thru ability). Photograv 3.0, Corel X6, Adobe Design Standard CS4 Suite, Engrave Lab laser Version 8, Melco Single Head Comercial Embroidery Machine, Carvewright CompuCarve, Smithy Granite 1340 Industrial Series, John Deere 4720 4x4 with cab, International TD9-B bull dozer, John Deere 490E excavator, Yamaha Rhino and more....

  2. #2
    Join Date
    Dec 2012
    Location
    Nova Scotia, Canada
    Posts
    84
    is the font your looking for actually called Interlocking Engravers Font??
    if so, i couldnt find it, but if you know another name for it, go to www.dafont.com
    you can download lots of fonts for free, and it has a decent search tool..

    hope that helps.
    Bodor 530 60W, CorelDraw X6

  3. #3
    Join Date
    Dec 2009
    Location
    Claremont NH
    Posts
    1,068
    if you have a sample, try it on http://www.myfonts.com/WhatTheFont/

    If it's just a keychain, might be worth a couple of dollars to get one done
    so you can search for the font by other names.
    Interlocking and engravers sound like descriptions rather than names.
    (but they could be names, too)

  4. #4
    Join Date
    Dec 2012
    Location
    Nova Scotia, Canada
    Posts
    84
    Quote Originally Posted by Chuck Stone View Post
    Interlocking and engravers sound like descriptions rather than names.
    (but they could be names, too)
    thats what i was thinking.
    Bodor 530 60W, CorelDraw X6

  5. #5
    Join Date
    Jan 2009
    Location
    Lexington, TN
    Posts
    96
    AJL .png

    This is reduced image of scan of keytag she sent me to look at. Letters are A - left: J - center; L - right. The extra swirls help lock everything together within the circle. Possibly I have the name wrong, but get plenty of hits on google with it, but not a source to purchase it, just others stating it is a font they use on items they sell.
    Doing What's Right Isn't Always Easy, BUT It's Always What Is Right

    Universal Laser ILS 12.150D (48"x24") with 60 watt single laser. Class 4 Module (pass thru ability). Photograv 3.0, Corel X6, Adobe Design Standard CS4 Suite, Engrave Lab laser Version 8, Melco Single Head Comercial Embroidery Machine, Carvewright CompuCarve, Smithy Granite 1340 Industrial Series, John Deere 4720 4x4 with cab, International TD9-B bull dozer, John Deere 490E excavator, Yamaha Rhino and more....

  6. #6
    Join Date
    Nov 2006
    Location
    Maple, Ontario, Canada
    Posts
    417
    Google for Harold monogram fonts.

    www dot fontbros dot com
    Last edited by Tony Lenkic; 02-06-2013 at 9:51 PM.
    Trotec Speedy 300 - 60w
    ULS V400-40W,
    Xenetech 1625,
    New Hermes TX pantograph,
    Brady Globalmark2 label printer,
    Assortment of custom tooling , shears & punches, heat bender.
    Software: Xenetech XOT, Corel X3, Bartender label software

  7. #7
    That appears to be a rotary/drag font call Interlocking . Single line text that has been line width modified and a circle drawn around the text. I have a version for the Newing Hall..
    Mark
    In the Great Northwest!

    Trotec Speedy 25, Newing-Hall 350, Wizzard 2000, NH-CG-30, Ricoh GXe3300 & Genny (Sublimation Mug Press), CS5, 5/9/x6 CorelDraw

  8. #8
    Join Date
    Jan 2009
    Location
    Lexington, TN
    Posts
    96
    I found some similar fonts on Harold monogram fonts, maybe she will be OK with one of them. I gather if this is a rotary/drag font that it is not like a true type font that works in Corel. Harold states if the fonts are used to personalize items to sell (like I am trying to do) there is a different license agreement that has to be used - which I guess means cost more. The fonts were very reasonable I thought as priced online. Have sent inquirey about the license agreement to find out what the cost will be for my purpose. Will advise when I get answer. I appreciate your replies. I already spent a few hours "googling" and on forum here with little to show for time spent.
    Doing What's Right Isn't Always Easy, BUT It's Always What Is Right

    Universal Laser ILS 12.150D (48"x24") with 60 watt single laser. Class 4 Module (pass thru ability). Photograv 3.0, Corel X6, Adobe Design Standard CS4 Suite, Engrave Lab laser Version 8, Melco Single Head Comercial Embroidery Machine, Carvewright CompuCarve, Smithy Granite 1340 Industrial Series, John Deere 4720 4x4 with cab, International TD9-B bull dozer, John Deere 490E excavator, Yamaha Rhino and more....

  9. #9
    In my Engravlab it resides in the Newing Hall fonts folder as Interlocking Monogram 3 line.

    Here it is as a pdf.
    Attached Files Attached Files
    Mike Null

    St. Louis Laser, Inc.

    Trotec Speedy 300 Newing Hall 350 Hot Stamping
    Woodworking shop CLTT and Laser Sublimation Sand Carving Graphtec CE5000-60
    Evolis Card Printer

  10. #10
    Join Date
    Jan 2009
    Location
    Lexington, TN
    Posts
    96
    Thank You Mike! I will have to look tonight when I get in from work for that. That looks exactly like what I need. Will be a bit more trouble to get desired shape than just typing text and printing, but not too much to turn down jobs I think.
    Doing What's Right Isn't Always Easy, BUT It's Always What Is Right

    Universal Laser ILS 12.150D (48"x24") with 60 watt single laser. Class 4 Module (pass thru ability). Photograv 3.0, Corel X6, Adobe Design Standard CS4 Suite, Engrave Lab laser Version 8, Melco Single Head Comercial Embroidery Machine, Carvewright CompuCarve, Smithy Granite 1340 Industrial Series, John Deere 4720 4x4 with cab, International TD9-B bull dozer, John Deere 490E excavator, Yamaha Rhino and more....

  11. #11
    What kind of engraving do you do with a bulldozer?
    Mike Null

    St. Louis Laser, Inc.

    Trotec Speedy 300 Newing Hall 350 Hot Stamping
    Woodworking shop CLTT and Laser Sublimation Sand Carving Graphtec CE5000-60
    Evolis Card Printer

  12. #12
    Join Date
    Jan 2009
    Location
    Lexington, TN
    Posts
    96
    Dirt
    Ole boy has been sitting & rusting. Haven't used it in about 7 years. Got it started last summer to move it (so I could cut the saplings growing up in & around it) and it now only goes forward & backwards. Steering clutches stuck and can't steer it now. That's what happens when you let your toys sit too long without using them.

  13. #13
    Join Date
    Jan 2009
    Location
    Lexington, TN
    Posts
    96
    Quote Originally Posted by Mike Null View Post
    In my Engravlab it resides in the Newing Hall fonts folder as Interlocking Monogram 3 line.

    Here it is as a pdf.
    I have Engravelab Laser V8 and cannot find the font in the fonts that came with it. Is what you have something that you could share with me?
    Doing What's Right Isn't Always Easy, BUT It's Always What Is Right

    Universal Laser ILS 12.150D (48"x24") with 60 watt single laser. Class 4 Module (pass thru ability). Photograv 3.0, Corel X6, Adobe Design Standard CS4 Suite, Engrave Lab laser Version 8, Melco Single Head Comercial Embroidery Machine, Carvewright CompuCarve, Smithy Granite 1340 Industrial Series, John Deere 4720 4x4 with cab, International TD9-B bull dozer, John Deere 490E excavator, Yamaha Rhino and more....

  14. #14
    "Newing Hall fonts folder as Interlocking Monogram 3 line." this is an .epf file for Newing Hall. Mike N. were you able to import/download NH fonts into Engrave Lab??? I have tried and I can only use in JLS ...
    Mark
    In the Great Northwest!

    Trotec Speedy 25, Newing-Hall 350, Wizzard 2000, NH-CG-30, Ricoh GXe3300 & Genny (Sublimation Mug Press), CS5, 5/9/x6 CorelDraw

  15. #15
    I have not been able to import anything into Engravlab but I bought my Engravlab from Newing Hall as part of my upgrade and it had a fairly long list of NH fonts in their folder. The fonts are all vef in the Engravlab folder including the NH. Mine is not the laser version.

    You might give Jeff Mathias at NH a call to see if he can help you.
    Mike Null

    St. Louis Laser, Inc.

    Trotec Speedy 300 Newing Hall 350 Hot Stamping
    Woodworking shop CLTT and Laser Sublimation Sand Carving Graphtec CE5000-60
    Evolis Card Printer

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •