Greetings to all! I have been a ‘lurker’, since 2009, and this is my first post. I inherited this MF Langdon Acme Miter Box from Dad some years ago (Number 74, size 2 ½). It’s missing the depth stops-the long ones that allow you to cut dadoes. No luck finding them, so I would like to fabricate a pair. If someone has a set, I would like to know the dimensions, i.e. overall length and width, overall length and width of the slot, and thickness of the material. Any pics of the stop, and esp. the knobs would be a big help. I found one post in this forum talking about depth stops, but they were for a 74c. Those are curved, and the stops I need mount on the flat spot in one of the pics I posted. Thanx in advance for looking, and any help anyone may provide… Oops, It looks like I put the carts in front of the horse.....
Reply With Quote