The two ways that I will use resaw blades are.1. slicing veneer which I am leaning toward using the Highland Woodworking Woodslicer and no.2 splitting 2" boards into 1" boards which I will use a 3 tooth 1/2" blades on my Delta 14" Bandsaw with riser block. The Lee Valley catalog has Viking Blades that are 3 tooth 1/2" and then also lists a resaw blade that is 3 tooth 5/8" and has carbide impregnated teeth for $60. Has anyone out there used this blade and what is your experience with it? Thanks Barry