I ran the test that Dan suggested, firing the laser into a block of acrylic. Here is a video and some pictures of the test.
TEM00_1.jpg TEM00_2.jpg TEM00_3.jpg
I ran the test that Dan suggested, firing the laser into a block of acrylic. Here is a video and some pictures of the test.
TEM00_1.jpg TEM00_2.jpg TEM00_3.jpg
Shenhui 1440x850, 130 Watt Reci Z6
Gerber Sabre 408
TEM00, for sure... thanks for that, Rich. Any chance you can get clear pics of the whole tube? And measurements? Just trying to see what's different between the Reci tubes and the standard ones to get them more power...
Good photo work, BTW
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5
Here is a dimensioned drawing;
Reci W2.jpg
1354257845_be536f31.jpg
Shenhui 1440x850, 130 Watt Reci Z6
Gerber Sabre 408