Any opinions on the Delta AP400, for a garage shop using one machine at a time. Seems like a good price and certainly an upgrade fromthe current dust collection system (shopvac )
http://www.amazon.com/exec/obidos/tg...&s=hi&n=228013
Any opinions on the Delta AP400, for a garage shop using one machine at a time. Seems like a good price and certainly an upgrade fromthe current dust collection system (shopvac )
http://www.amazon.com/exec/obidos/tg...&s=hi&n=228013
The means by which an end is reached must exemplify the value of the end itself.
Zahid -
I use the AP400 in my basement. For the price it is a nice little unit. I would like one of the bigger systems, but until I get the shop ready the AP400 has been great.
It wheels around easily from tool to tool. I use it on a jointer, planer, router table, bandsaw, tablesaw, miter saw, and drill press (when sanding). I was using a shop-vac before, and I wish I'd got the AP400 years ago.
Ryan Ricks