Currently I have the highly rated Delta 50-760, and although it works well, I am tired of moving the hose from machine to machine and will instead be installing permanent "plumbing" to each machine.

At the same time, I am going to upgrade to a cyclone machine and have narrowed it down to the G0443 1.5hp. Grizzly Cyclone, but when I look at the numbers my Delta is 1200CFM, and the Grizzly is 1025CFM. . .so will I miss the extra CFM?

Is there anything out there with higher CFM, or a better cyclone option that will run on 110V? I really wish I could upgrade to 220V for the DC but, it is not an option, so from what I see I am stuck with 1.5hp.

FYI: I will need it to collect dust from Table Saw (12' away), Bandsaw(7' away), Planer(5' away), 25" Drum Sander(5' away), and assorted small tools 12'-18' from DC. Only using one tool at a time.

Will the cyclone cover it, or am I going to be swimming in dust?