Results 1 to 3 of 3

Thread: How do I repair a lacquer drip/sag?

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 05-17-2013, 5:46 PM #1
    Jack Gaskins's Avatar
    Jack Gaskins
    Jack Gaskins is offline [OP] Member
    Join Date
    Mar 2006
    Location
    Indianapolis
    Posts
    723

    How do I repair a lacquer drip/sag?

    I have some small birdhouse ornaments I turned and I sprayed them with rattle can lacquer but got a little excited and now have a couple of spots where the lacquer has sagged or run. There are about 4 coats on already so the birdhouses are shinny and the lacquer is thick. How do I get rid of the sag? Do I sand it out or just spray more coats over it? Im not very experienced when it comes to finishes.....Thanks. Jack
    Last edited by Jack Gaskins; 05-17-2013 at 6:47 PM.
    U.S.A.F. Ret. MSgt 2006
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules