Hey Creekers, long time viewer, first time poster.
I'm Having difficulty with a Trotec Speedy 300. When running jobs that require the head to travel along the X axis for the full length of the table, we receive a double image. (See picture) This only happens with smaller, intricate designs and only when the head travels most of the X length of the table. Also, when this happens, only the inner text is doubled, while the outer text looks fine.
I have aligned the mirrors best I could. Every corner of the table engraves fine. I also tested engraving at the center of the table, where our problem with doubles happens. And when left to engrave a smaller area (7.5 x 6.5) with the same intricate design, it does fine.
Any help or tests I can run to determine the problem would be gratefully appreciated. Thanks!