Results 1 to 7 of 7

Thread: Glue that wont melt spray paint.

  1. 07-14-2013, 9:06 PM #1
    Joe Hillmann
    Joe Hillmann is offline [OP] Member
    Join Date
    Oct 2011
    Posts
    1,456

    Glue that wont melt spray paint.

    I am doing some work with clear acrylic. I paint it, engrave through the paint, then paint again. I am trying to find a glue that I can use to securely attach the acrylic pieces to jewelry? So far I have been using silicone but it doesn't secure it well enough.
    Universal M-300 (35 Watt CO2)
    Universal X-660 (50 Watt CO2)

    Hans (35 watt YAG)
    Electrox Cobra (40 watt YAG)


    Glass With Class, Cameron, Wisconsin
    Reply With Quote Reply With Quote
  3. 07-14-2013, 9:14 PM #2
    Kim Vellore
    Kim Vellore is offline Member
    Join Date
    Sep 2006
    Posts
    418
    e600 is pretty good at plastic to metal an flexible too. The strongest I have used so far.
    Reply With Quote Reply With Quote
  4. 07-14-2013, 9:39 PM #3
    Joe Hillmann
    Joe Hillmann is offline [OP] Member
    Join Date
    Oct 2011
    Posts
    1,456
    Do you mean e6000? If so it doesn't work. It melts the paint. If you do mean e600 I will keep searching and see if I can find it.
    Universal M-300 (35 Watt CO2)
    Universal X-660 (50 Watt CO2)

    Hans (35 watt YAG)
    Electrox Cobra (40 watt YAG)


    Glass With Class, Cameron, Wisconsin
    Reply With Quote Reply With Quote
  5. 07-15-2013, 3:52 AM #4
    Dave Sheldrake's Avatar
    Dave Sheldrake
    Dave Sheldrake is offline Member
    Join Date
    Jul 2013
    Location
    UK
    Posts
    3,212
    Ladies Nail Varnish Joe, it will bond to the paint and so long as you don't put too much pressure on it during application it will dry before it has chance to do any damage. If you use nail varnish as the second colour and as a glue at the same time that may do it too.

    best wishes

    Dave
    Reply With Quote Reply With Quote
  6. 07-15-2013, 4:57 AM #5
    matthew knott
    matthew knott is offline Member
    Join Date
    Aug 2011
    Location
    Shefford, United Kingdom
    Posts
    685
    Hot glue gun might do the trick, if you get those in the US of A, sure you do, also can be got of with a bit of effort unlike most glue.
    L Squared Lasers UK
    2 x Halo Lasers 20 watt fiber
    1 x Halo CO2 Galvo System
    1 x Shenhui 1512 80 watt
    3 x Electrox D40
    3 x electrox Scriba 2
    1 x Electrox Scorpion 40 watt Fibre
    1 x Epilog EXT36 75 watt.
    Reply With Quote Reply With Quote
  7. 07-15-2013, 7:09 AM #6
    Rodne Gold's Avatar
    Rodne Gold
    Rodne Gold is offline Member
    Join Date
    Oct 2004
    Location
    Cape Town, South Africa
    Posts
    3,922
    Epoxy glue or 3m VHB (Very high bond) double sided tape will work
    Rodney Gold, Toker Bros trophies, Cape Town , South Africa :
    Roland 2300 rotary . 3 x ISEL's ..1m x 500mm CnC .
    Tekcel 1200x2400 router , 900 x 600 60w Shenui laser , 1200 x 800 80w Reci tube Shenhui Laser
    6 x longtai lasers 400x600 60w , 1 x longtai 20w fiber
    2x Gravo manual engravers , Roland 540 large format printer/cutter. CLTT setup
    1600mm hot and cold laminator , 3x Dopag resin dispensers , sandblasting setup, acid etcher
    Reply With Quote Reply With Quote
  8. 07-15-2013, 10:04 AM #7
    Joe Hillmann
    Joe Hillmann is offline [OP] Member
    Join Date
    Oct 2011
    Posts
    1,456
    I wanted to avoid epoxy due to having to mix it. We ended up using a gell super glue. To my surprise it didn't harm the paint.
    Universal M-300 (35 Watt CO2)
    Universal X-660 (50 Watt CO2)

    Hans (35 watt YAG)
    Electrox Cobra (40 watt YAG)


    Glass With Class, Cameron, Wisconsin
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules