Hi guys I am new here. I was referred to this site by a friend who contributes to the site. Just to give a little background
I am from the Upper Penninsula of Michigan. I am a Journeyman Electrician by trade and play a lot of guitar. I decided not to long ago that its time I built my own. So... I have some very good friends who work in the woods for a living and are supplying me with some of their best Ash and Maple. Another friend of mine does the saw work. So it seems to be working out pretty good as far as the materials go. My main question is in setting up a place to spray what I build. How big of a spray booth or room would be adequate to do this, and how big of an exhaust fan is enough to do it? I would imagine there are filters on the outside to catch any overspray going through the exhaust. Any examples that you could point to would be extremely helpful.
Thanks
Jeremy