Results 1 to 4 of 4

Thread: Source for turned feet and finials

  1. #1
    Join Date
    Aug 2004
    Location
    Fort Worth, TX
    Posts
    805

    Source for turned feet and finials

    A friend wants me to make a Pottery Barn bed for him, and the posts have turned feet and finials. I've been looking for a source, but all I've found is some at Rockler. They're just a bit pricey at 11 or 12 bucks each (which comes out to 24 bucks per post. I'd like to find a less expensive source.

    Also, this is to have a trundle, and I'm looking for rollers or wheels that are suitable. I found some underbed box rollers, again at Rockler, but I'm not sure they're adequate for the purpose. THey are rated for 80 pounds each, and screw to the side of the case.

    Thanks for any help and advice.

  2. #2
    Join Date
    Feb 2003
    Location
    New Orleans LA
    Posts
    1,334

    Try Adams

    Google around for Adams Woodworking - or something like that. They are in Tennessee, I think.
    18th century nut --- Carl

  3. #3
    Join Date
    Feb 2003
    Location
    Tidewater, VA
    Posts
    2,124
    Dan -

    I have made a few purchases from Adams Wood Products and been very satisfied. One was even, by coincidence, a pick up at the plant. Very friendly and helpful folks. They even made some suggestions to save a few bucks.

    Regards,
    Ted

  4. #4
    Join Date
    Jan 2005
    Location
    Harrisburg, NC
    Posts
    2,255
    Dan, I like www.osbornewood.com/. I think their prices may be a little better also.

    Richard

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •