This is how I got it:
1.jpg 2.jpg
This is how it looks today.
Done_1.jpg Done_2.jpg
This is how I got it:
1.jpg 2.jpg
This is how it looks today.
Done_1.jpg Done_2.jpg
Never, under any circumstances, consume a laxative and sleeping pill, on the same night
Very nice, Myk. I love the "period" looking stand too. It enhances the effect - did you make the stand or buy it with the tool and refinish it?
I really enjoy seeing old tools restored and reused. I've reclaimed a couple hand planes so far, but no machines. Have you fired her up yet? How's she run?
Fred
Thanks, Fred.
I designed and built the stand out of cherry. Still have the electrics to finish, but I have had it running. It's very smooth throughout the speed range.
The saw is painted Rust-Oleum aged copper.
Here are some shots of the stand during the build. I used 30 #0 biscuits for maximum strength.
I free-handed the design on cardboard, then cut a hardboard half template.
46.jpg48.jpg
Pattern bit in the router table.
52.jpg55.jpg
Design and make the bracing.
56.jpg
Before finishing with clear satin Polyurethane. 2 coats.
59.jpg
Last edited by Myk Rian; 08-29-2013 at 10:13 PM.
Never, under any circumstances, consume a laxative and sleeping pill, on the same night
Myk
Great job on your restoration, and it came with a retirement light. Tom
Thanks for the build up photos. You gave me a couple new ideas!
Enjoy it!
Fred
Here are the final pics. I got the electrical finished.
20130908_142104.jpg 20130908_142126.jpg
Never, under any circumstances, consume a laxative and sleeping pill, on the same night
Myk,
This one came from a local machine shop, my friend gave me the saw a few years ago. I expect that you know that you know that you can use jig saw blades in these saws, they will clamp securely in the lower arm.
.
Feakin' awesome, Myk! The finish turned out great. Hard to belive it's rattle-can. Thanks for sharing.
Erik Loza
Minimax USA
Beautiful!
Fred
Nice work Myk. It's great to see someone return old machines to their former glory. I think you've done this for several machines.
Congrats on a job well done.
Gary
Myk,
That is one GREAT save......
Army Veteran 1968 - 1970
I Support the Second Amendment of the US Constitution