Yes, that is the kind of proof I need about some of what I am giving up vs a better machine.
Is that machine galvo or gantry?
Gantry I'd bet, Galvos weren't in the public domain as much 10 years ago.
cheers
Dave
You did what !
Galvos wont allow smaller engraving, if anything its the other way round, i will try some small letters on a fiber tomorrow, the small spot size due to the laser should allow me to beat anything posted thus fair. A gantry fibre would allowing even smaller marking as you can use a shorter focal length lens!
L Squared Lasers UK
2 x Halo Lasers 20 watt fiber
1 x Halo CO2 Galvo System
1 x Shenhui 1512 80 watt
3 x Electrox D40
3 x electrox Scriba 2
1 x Electrox Scorpion 40 watt Fibre
1 x Epilog EXT36 75 watt.
Lasers : Trotec Speedy 300 75W, Trotec Speedy 300 80W, Galvo Fiber Laser 20W
Printers : Mimaki UJF-6042 UV Flatbed Printer , HP Designjet L26500 61" Wide Format Latex Printer, Summa S140-T 48" Vinyl Plotter
Router : ShopBot 48" x 96" CNC Router Rotary Engravers : (2) Xenetech XOT 16 x 25 Rotary Engravers
Real name Steve but that name was taken on the forum. Used Middle name. Call me Steve or Scott, doesn't matter.
As Dan pointed out is all becomes pointless as you need a microscope to see it after a while, but it will give you a comparison.
L Squared Lasers UK
2 x Halo Lasers 20 watt fiber
1 x Halo CO2 Galvo System
1 x Shenhui 1512 80 watt
3 x Electrox D40
3 x electrox Scriba 2
1 x Electrox Scorpion 40 watt Fibre
1 x Epilog EXT36 75 watt.