Here is a link that I picked up from the Vectric Forum that might be of interest to some.
Paul Rountree's Web Site
Here is a link that I picked up from the Vectric Forum that might be of interest to some.
Paul Rountree's Web Site
Although I am still working on buying a CNC router, I can already see the potential usefulness of what he has to offer. Thanks for the link!
Hey Keith,
Thanks for the post but I could not find any links or info on Gadgets. can you narrow it down?
Thanks and ...
Have a Blessed day,
Michael Kowalczyk
Laser-Trotec Speedy II 60 watt with 9.4.2 job control and will soon upgrade to JC X
Corel Draw Suite X6, FlexiSign Pro 8.62, AI CS3 and Lasertype6
CNC Routers-Thermwood model C40 with 4th axis. Thermwood Model 42 with dual tables and dual spindles with ATC for high production runs,
ArtcamPro 2010_SP4, EnroutePro 5.1, BobCad v21 & v24, Aspire v8 and Rhino 5.
FOTC link
http://www.sawmillcreek.org/friends.php?cp=210&lp=0&t=0&q=
Michael,
The menu bar right under his name at the top of the page has a Gadget link.
http://paulrowntree.weebly.com/gadgets.html
I found the StandingWave app he wrote a while back. Always wanted to try to use it but never really had a project for it. Going to try to incorporate some of the designs in my new house.
Vectric has two separate pages for gadgets now and a developer kit available. I talked to Aaron Koehl yesterday about the possibility of him creating a Braille drilling gadget for Aspire. Aaron wouldn't commit to the project, I hope he will think about it though.
.