Originally Posted by
Mel Fulks
I just went and read that again. It says "lacquer thinner, acetone, or other appropriate solvent". They reccommend one inappropriate solvent and don't mention MEK. I find that sloppy. No wonder there is debate and theory!
Mel, I'm not trying to argue with you - just trying to be clear for the OP - below is the quote from the West System thread detailing specifically how to prepare teak and other oily woods - found down the page from the general comments you quote -
"Teak/oily woods-Wipe with acetone 15 minutes before coating. Solvent removes the oil at the surface and allows epoxy to penetrate. Be sure solvent has evaporated before coating."
"... for when we become in heart completely poor, we at once are the treasurers & disbursers of enormous riches."
WQJudge