Results 1 to 1 of 1

Thread: Two LED edge lit signs

  1. #1
    Join Date
    May 2011
    Location
    New Hampshire
    Posts
    101

    Two LED edge lit signs

    I just started doing this last month. These are 6x12" and 9x9" respectively. I use a diamond drag bit on 3/8" thick acrylic and had to build my own bases (two 3/4" MDF pieces) since I couldn't find a satisfactory solution to buy. I friction fit the acrylic into the slot but found that the so called 3/8" thickness can vary by several hundreds, so you have to custom cut the slots for the particular thickness. I also created a slot to hold the remote control. This is the 2nd high school logo I've worked on. You need to engrave on the back side of the acrylic for better visibility and not see a reflection - hence you need to mirror any design prior to engraving. A gentleman with the online handle Xray posted a lot of details about how to do this on both the camheads and vectric forums and that info was instrumental in expediting my ability to do these.


    SAM_2566.jpgSAM_2497.jpg
    Last edited by Rich Fennessey; 11-24-2013 at 2:32 PM.
    CAMaster Cobra X3 408 w/Recoil
    BobCAD V25
    Corel Draw X5

    Precision Sign and Post
    Windham, NH

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •