Never would have thought of this. Cool fence Jig. I've done tons of pattern cutting on a router table, but never on the tablesaw.
https://www.youtube.com/watch?v=7b6D3dwA3v0
Never would have thought of this. Cool fence Jig. I've done tons of pattern cutting on a router table, but never on the tablesaw.
https://www.youtube.com/watch?v=7b6D3dwA3v0
Bob Van Dyke's take on the "L" fence is pretty cool as well.
"A hen is only an egg's way of making another egg".
– Samuel Butler
Fine Woodworking had an article on this a few months back. I've done it for years but never gave it much thought. i figured everyone did it.
Works great for getting the base and top lip even all around a box, urn or such. Just set the jig out over the blade as far as you want the base/top to stick out, keep the sides tight to the jig, trim and the exposures are all perfect even if the item is odd shaped
Last edited by Dick Brown; 01-03-2014 at 6:17 PM.