There was a preview of these in my I-Box thread. Simple shelves that served as a test project for my I-Box jig. Maple and Walnut, finish is Seal-A-Cell, Arm-R-Seal, and Renaissance Wax. Finally worked up the courage and had the time to install them.
20140129_002722992_iOS.jpg20140129_002804911_iOS.jpg
Install actually went pretty easily. I used keyhole slots on the back, near the top of the small shelves and the same distance up from the bottom on the big ones. I used my laser level to shoot a level line at the height of the screws and ran the edge of blue tape along that. From there I layed out all the mounting dimensions on the tape so I could install anchors, and screws. The tall ones have an extra set of holes near the top but I didn't feel they needed more once I tried just the lowers.