Hello, I got a new, unfinished tote for an old #4 Stanley style bench plane to replace the original one that finally split and I wanted to put a good finish on it before I install it. Can anyone offer some advice/method/technique on the best way to finish the tote? I've read about using BLO followed by clear shellac or lacquer and 4/0 steel wool then paste wax, as one way. Another way I recently read about was Watco natural Danish oil, followed by a couple coats of Tung oil. I have not used any of these products so I'd really love some good advice and opinions. I definitely want a nice durable finish, as I will be using the tool regularly, hopefully for many years to come, and would love to preserve some of the natural beauty of the wood too, if possible.