[OP]
Member
problem sending to laser
I have a customer that sent me a file in pdf and dwg format. When I sent it to laser to cut it only cut out 3 of the several pieces in file. When I delete the three that cut it will not give the option to print. I don't know what is going on. I tried importing it again and it only imported the three pieces that cut. I am at a loss, has anyone else had this problem?
[SIGPIC][/SIGPIC]
Epilog mini 2412 45 watt
corel x4
sand carving unit
full wood shop
Contributor
Can you attach or make the file available. Are you printing out of Corel? In corel did you do a select all and make sure the color and line thickness were correct for vector cut?
Mark
In the Great Northwest!
Trotec Speedy C25, Newing-Hall 350 (AMC I & HPGL), NH-CG-30 (Carbide Cutter Sharpener)
Sawgrass 400 Gel Ink Printer, CS5, 5/9/x6 CorelDraw
Contributor
Besides for color and thickness, it could also be layers.
I read recipes the same way I read science fiction. I get to the end and I think, "Well, that’s not going to happen."
This is my guess...Originally Posted by Mike Chance in Iowa
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru)
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5
[OP]
Member
I finally figured it out with much frustration and mumbling to myself. This simple box drawing in auto cad had 20 layers because EVERYTHING in auto cad has its own layer. Was able to pull what I needed up to top layer and get it to cut. Only took 24 hours to get it figured out. Thank you for the suggestions. Been so busy had not had a chance to be on here much.
[SIGPIC][/SIGPIC]
Epilog mini 2412 45 watt
corel x4
sand carving unit
full wood shop
Posting Permissions
Reply With Quote