I'm new to the forum and need a little advice. I'm building roughly 20 drawers for my kitchen cabinets, will be painted. The drawers will vary between 16 to 18 inches wide and 9 to 10 inches high and 20 to 22 in. deep. I would like to use 1/2" BB with box joints for the box and glued up poplar for the fronts. Does this sound reasonable? I'm not sure about the drawer bottom thickness or if 1/2" BB drawer sides will be strong enough for heavy pots and pans. Should I go with thicker sides and 1/2" ply bottom? Mike