[OP]
Contributor
Found a 3d horse file and after much work I was able to convert each piece to a *.dxf file format and cut it on the laser.
This particular file was very troublesome, (and very large like 300in x 500 in ,it was probably metric )i have done many of these but it was never a lot of editting as this was.
Its not perfect but ok.
I like these files, i like the 3d to 2d and back to 3d
http://youtu.be/1LX_7Zx0pJQ
Member
I really like your horse design. Any chance I could get a copy of the DXF files?
Ray Scott
Rabbit Laser USA
Stan!
Very nice! That is a fun design! Thanks for sharing it!
Dave
900x600 80watt EFR Tube laser from Liaocheng Ray Fine Tech LTD. Also a 900x600 2.5kw spindle CNC from Ray Fine. And my main tool, a well used and loved Jet 1642 Woodlathe with an outboard toolrest that helps me work from 36 inch diameters down to reallllllly tiny stuff.
Contributor
if you share with Ray you have to share with all of us LOLOriginally Posted by Ray Scott
If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
Rabbit RL_XX_6040-60 watt Laser engraving/cutting machineOh wait its a 3D Printer my bad LOL
Lasercut 5.3
CorelDraw X5
10" Miter Saw with slide
10" Table Saw
8" bench mount 5 speed Drill Press
Dremel, 3x21 Belt Sander
Posting Permissions
Reply With Quote
