I'm about ready to get into spray finishing. I'm working on a bathroom vanity and tub apron that will be sprayed with colored lacquer (semi gloss white). I'll be spraying with a PC PSH1 HVLP gun and Homestead Finishing has recommend a 1.7mm tip. My compressor will probably complain, its a PC 15 gallon.
So here's my question - Since the lacquer is water based (Oxford USL) is there a problem if I spray in my basement shop? I will wear a NIOSH approved respirator and will rig up a small box fan/filter to help exhaust the room. Also the tools and stuff will be draped so as not to get any over spray on them.
Any other tips for a newbie sprayer?
Thanks, Mike