General High Performance Poly for a walnut table top vs. Endurovar

[Hunter Locke]

Interestingly, according to their data sheets I should be using 1.4mm air cap, but their customer service person recommended the smaller size.

Honestly, I don't have my hopes very high, but will give it another shot given I have a ton of it still left. I will do this with test boards only. If I don't get good results I will get try the Enduro Clear Poly.

I found this thread after looking at their EnduroVar data sheet, and I'm not seeing where it says use a 1.4mm?

[John TenEyck]

I found this thread after looking at their EnduroVar data sheet, and I'm not seeing where it says use a 1.4mm?

Here's GF's Tech Data Sheet: http://generalfinishes.com/sites/def...ish-021510.pdf

John