Lensholder for gcc venus (same as mercury)?

[Niklas Bjornestal]

I would like to be able to use 3d party lenses for my gcc venus, but i would need something to mount them on, so does anyone have a drawing for a lensholder for gcc lasers (for 2"/2.5" lenses)?

[Chuck Stone]

I'd love to know that, too. It would be nice to get a couple of spare lenses
that didn't cost over $300 ea..

[Jim Reinhard]

I just measured the one I have with a caliper and cut them from acrylic,for the lens recess I rastered the circle first and then cut out the center smaller. Sanded a slight bevel on the 2 sides.I got the lenses off ebay and they seem to work just as well as the stock ones.
20140618_195906.jpg20140618_195906.jpg