Page 23 of 24 FirstFirst ... 13192021222324 LastLast
Results 331 to 345 of 348

Thread: Pole Barn 40X64X16

  1. #331
    Mike I thought you listed you vendor for the infloor heating system parts and design . Can you re post ? thanks Dan Nelson

  2. #332
    If you watch his videos, he states that he got the in floor tubing/manifolds from Blueridge Co. As did I. They are a very good company to work with, and quite a bit cheaper than Menards.

  3. #333
    Thanks dan

  4. #334
    Join Date
    Oct 2006
    Location
    Bloomington, IL
    Posts
    5,435
    I built the panel myself. Studied the panel at Menards and the hydroshark panels on their site. I ended up going with larger pumps on the primary and secondary loops and still saved more than half the money.
    Glad its my shop I am responsible for - I only have to make me happy.

  5. #335
    Thanks Mike, would you mind shooting me a email ? I have some off line questions I would like to ask you if you could spare the time. Thanks Dan . nelsonwoodcrafters@yahoo.com

  6. #336
    I would put the idler motor outside. I did that with my 15hp when I had to run a rpc, so much quieter.

  7. #337
    Join Date
    Oct 2006
    Location
    Bloomington, IL
    Posts
    5,435
    My purpose made RPC shaftless 20hp Baldor ideler is darn near silent. Not sure what noise you guys had with yours but it sure does not warrant a separate anything.
    Glad its my shop I am responsible for - I only have to make me happy.

  8. #338
    Doesn't sound very silent in those videos. Far from it.

  9. #339
    Join Date
    Oct 2006
    Location
    Bloomington, IL
    Posts
    5,435
    The ideler is about the same noise as a drill press. Plus with the shop's size, that ideler running will be all but silent when you are by any major tools.
    Last edited by Mike Heidrick; 09-12-2017 at 1:42 PM.
    Glad its my shop I am responsible for - I only have to make me happy.

  10. #340
    Mine lasted about a week inside. So much more peaceful when I stuck it outside. Now that I have 480v pole power the only thing annoying are the two big transformers.

  11. #341
    Quote Originally Posted by Darcy Warner View Post
    Mine lasted about a week inside. So much more peaceful when I stuck it outside. Now that I have 480v pole power the only thing annoying are the two big transformers.
    HA!

    I have LED lighting. No buzz. I've got a 150kva transformer making up for it though.

  12. #342
    Quote Originally Posted by Martin Wasner View Post
    HA!

    I have LED lighting. No buzz. I've got a 150kva transformer making up for it though.
    Not sure what one is louder my 150kva one for 480 to 240 or the smaller 480v to 240v single phase one.
    They keep me company.

  13. #343
    Join Date
    Jan 2007
    Location
    Springfield, IL
    Posts
    400
    Quote Originally Posted by Mike Heidrick View Post
    Its no Clausing or 1200/1150 but I like the steel city 17. This one came from Cleveland. Also a fellow from here or woodnet gave me that 48x18 alum table a long time ago. Its back in action. I still owe him!

    That used to be my table! I'm thrilled you're actually putting it to good use!

  14. #344
    Join Date
    Oct 2006
    Location
    Bloomington, IL
    Posts
    5,435
    The closed cell foam insulation team I hired arrives tomorrow to spray the ceiling and gable ends of the shed in 3" of closed cell 2lb foam. I have the East 40X32 bare and after that is done we will move a few tools and the pallets of ply over to the east and they will spray the West 32X40. Wish me luck the next couple of days
    Glad its my shop I am responsible for - I only have to make me happy.

  15. #345
    Join Date
    Oct 2006
    Location
    Bloomington, IL
    Posts
    5,435
    They got 3/5 of the spray foam done today.



    Glad its my shop I am responsible for - I only have to make me happy.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •