Results 1 to 3 of 3

Thread: Laser Operating Temps. What's your take.

  1. #1

    Laser Operating Temps. What's your take.

    So the china machine that I have says 0-45c. I always thought that 45c was too high. I thought 30c was about the max. Have I been wrong all this time?

  2. #2
    Yes and No, run a fatbody tube above 23 degrees and you will start reducing the life in short order. the machine will run to 45 degrees but the water temp won't before you kill the tube pretty quick.

    cheers

    Dave
    You did what !

  3. #3
    Join Date
    Sep 2011
    Location
    naples florida
    Posts
    278
    hi there
    the temperature of 45 C is the maximum water temperature before the tube gets destroyed in a very very short time, sometimes just minutes ,
    the max operating temperature for a long live and max cutting power is 25C. with every degree higher you loose about 5% power and at 30 C the glue starts to soften and mostly the gas starts to escape.
    greetings
    waltfl

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •