Super Dust Deputy (Plastic) - bottom dimensions

[Ian Scofield]

Anyone that has the new molded plastic dust deputy: http://www.oneida-air.com/inventoryd..._no=SCOLLECT43


I'm looking to build a setup similar to seen here in this video where the super dust deputy is mounted to plywood and I have some flex hose connecting to the bottom to my rain barrel. I'm looking to get the dimensions of the bottom hole and flange so I know what fittings to buy ahead of time.

video: https://www.youtube.com/watch?v=QWafO_4Ox_w

If anyone can measure their super dust deputy for the inside diameter of the bottom hole, and the outside diameter of the flanges I'd greatly appreciate it. I've attached a rough picture to help.

[Mac Cambra]

Here is the template: http://www.oneida-air.com/pdf/super-...emplate-00.pdf

[Ian Scofield]

Exactly what I needed, thanks so much!

[Mac Cambra]

Glad to help, I happened to be on their site the other day and saw the template, it was buried on another page and not an obvious find so it was easy to miss.