Seems I am now the proud owner of one of theseIMAG0147.jpgStamped into the toe is "OHIO TOOL CO" and the numbers "81". length is 22", and the iron is 2-1/2" wide, maybe a Stanley #7 size? Single iron is tapered. No evidence that there ever was a chip breaker. Not much cracking or splits. Eyes do have a crack in them, but I think that can be fixed.IMAG0148.jpgSome damage to the top of the toe. Toe is worn a bit, may have to plane the sole flat?IMAG0149.jpgtote is in great shape. Wedge is still in good shape, iron is a rusty mess near the top, but from the wedge to the edge, there is very little rust. Bevel is very wide, due to the taper. One or two chips in the edge, easy to get out. Hardy any cracks in the soleIMAG0150.jpgMouth is a bit ragged, maybe planing the sole flat will help that? So, think I spent too much? Paid $10 after talking it down from$15