[OP]
Member
Another quickie for the shared bathroom. This is on 1/8" plywood but other materials will work as well.
For my machine, the engraving is done at 50% power and 100% speed. Cutting is done at 3.2% speed.
Attachment is in Corel Draw X5 cdr file.
photo.JPG
PS, the short form of the name is Nick not Nic
Laser: ULS M300-50 watts, ULS X25-75 watt, Chinese 100 and 150 watt
Software: Corel Draw, Corel PhotoPaint X8, Aspire, MasterCam, Fusion 360
CNC: Rockler 60th Anniversary Edition CNC Shark, EZ-Route CNC
Kingsley Hot Stamp machine
"Out of my mind....Back in 5 minutes"
Fun design Nick!! Thanks!!
Dave
900x600 80watt EFR Tube laser from Liaocheng Ray Fine Tech LTD. Also a 900x600 2.5kw spindle CNC from Ray Fine. And my main tool, a well used and loved Jet 1642 Woodlathe with an outboard toolrest that helps me work from 36 inch diameters down to reallllllly tiny stuff.
Contributor
Just can't be used in public buildings. (ADA Code) Great Farmers Market item though. Great Job!
Mark
In the Great Northwest!
Trotec Speedy C25, Newing-Hall 350 (AMC I & HPGL), NH-CG-30 (Carbide Cutter Sharpener)
Sawgrass 400 Gel Ink Printer, CS5, 5/9/x6 CorelDraw
[OP]
Member
Your right. Wasn't for use in public. Just something to stick on the door on the restroom of my private shop.Originally Posted by Mark Sipes
But if you're doing it in plastic, you can add the ADA code to the attached file.
Laser: ULS M300-50 watts, ULS X25-75 watt, Chinese 100 and 150 watt
Software: Corel Draw, Corel PhotoPaint X8, Aspire, MasterCam, Fusion 360
CNC: Rockler 60th Anniversary Edition CNC Shark, EZ-Route CNC
Kingsley Hot Stamp machine
"Out of my mind....Back in 5 minutes"
Member
Thank you for sharing, should raise a few eyes when I put it up next week in the factory.
Robert
Robert Tepper
Trotec Rayjet 300/80 Watt
Dahlgren 500 Engraving Machine, CNC Engraving Machine
Pad printer with 5 3/4 x 5 3/4" print area
Jackson Vulcanizers, 15 x 24", three total
Hegner Scroll Saws, 14", three total
Member
Here's one we put up in our shop. Made from Rowmark
bathroom sign.jpg
Bathroom sign.cdr
Ian Franks
Print Image / Paperkutz
Johannesburg South Africa
Machines - 50w chinese laser KM C454.
Contributor
Cute sign. We saw that for the first time last Saturday while at a community fair. Another set of "cute" signs we saw had words "For those who sit" and "For those who stand" on them.
I read recipes the same way I read science fiction. I get to the end and I think, "Well, that’s not going to happen."
Contributor
I do not know ADA Code but I saw these signs at a restaurant before, the signs may been on the hall way wall that lead to the restrooms
Posting Permissions
Reply With Quote