It is small. 25"x11"x7"
It is small. 25"x11"x7"
George
Making sawdust regularly, occasionally a project is completed.
Cut your blind dado with either your router or your TS with sides perpendicular to the face. Then use a router with a dovetail bit to cut the angled sides. You can use guides clamped across your piece to guide the router along the length of the dado.
Lee Schierer
USNA '71
Go Navy!
My advice, comments and suggestions are free, but it costs money to run the site. If you found something of value here please give a little something back by becoming a contributor! Please Contribute