Results 1 to 2 of 2

Thread: Trotec Job Control ver X

  1. #1

    Trotec Job Control ver X

    I'm looking for info on the use of the "Relief", "Layer", and "Photo Optimized" functions within Job Control. I've tried to use the relief function and was expecting results that had higher 3D definition over standard engraving process. The image I used was an 8bit 3D sample file from Gantry. If you have first hand experience and are getting good results, I'd appreciate hearing from you.

  2. #2
    Join Date
    May 2013
    Location
    Twin Cities, Minnesota
    Posts
    243
    For 3d you need high power, slow speed, and the right material. Softer woods are easier to get depth, and you may need to do multiple passes depending on your available laser power. On a trotec I've seen great results on a 40w machine with 2 passes and 100% power and 10-15% speed.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •