I needed to cut a really big sheet yesterday that had to hang out the front door of my VLS6.60 so I quickly made a door interlock override. I thought I would share it.
Here is the Corel X5 file.
laser_door_override.cdr
Here are some pictures. I used 10mm Acrylic and 1/4" magnets. They press fit into the holes and did not require glue but you could add some if you wanted.
100_7460.jpg
Here it is installed in the front door
100_7466.jpg
It seems to work well and being magnetic stows away inside the door for safe keeping. The part is symmetrical in x and y so does not require me to think about which way to fit it. I hope it is of some use to you.
Cheers
Keith