Hi, I have a Makita miter saw that I grabbed off craigslist a while back. Cant go wrong for $20 but I need a blade for it. For some reason the guy had a worn rip blade on it. But it runs and is pretty darned accurate. I am about to do some crown moulding and need a good blade for this. I am not looking to break the bank here (hey I go 20 in the saw so you know Im kinda cheap) but I am looking for something that will do a good job. Once I am done with the crown I will just keep this in the shed and it will be mostly used for 2x4 cutting as I usually hand cut all crosscuts in the shop. Here is a pic of what the saw looks like. Not mine just one on google....makita.jpg. For the record the rooms are small and I will be using 2 5/8" ~ 3" crown so it will work in this saw fine. Small rooms. I do believe I will build a little fence jig at the correct measurement to put the crown in upside down at the correct angel as there isn't much to hold it to on this saw. Thanks, John.