http://youtu.be/pDI5mzU0UDg african masks
used *.stl files to make these masks
http://youtu.be/pDI5mzU0UDg african masks
used *.stl files to make these masks
Very, very cool, Stan!
Live Oak Forge
40W Epilog Mini 18
Shopbot 32"x24"x6" PRT
Shopbot 48"x48"x6" PRS
Next Engine Scanner
Artcam
CorelDRAW X5
Multiple and various other implements of destruction
Verrrry cool! Did you generate the stl file?
Please help support the Creek.
"It's paradoxical that the idea of living a long life appeals to everyone, but the idea of getting old doesn't appeal to anyone."
Andy Rooney
No i googled *.stl 3d african masks and I found about 7 and picked these four ,then stuffed them into aspire and generated a toolpath to match up with 2 in thick butternut
I also had to use long end mills ,which can snap if you push it.
I also use a collett extension from MLCS in USA which extends my router collett
Stan, whose long endmills did you use? Russ
they come from carbide.ca and i also use 4 in ones too