Have you had any problem with the clasic leg vise from benchcrafted.

[Fidel Fernandez]

I got the classic leg vise and I have missing part.

The shaft from the main screw doesn't fit the hub.
Hub diameter 0.647 "
Shaft diameter 0.6515 "

They don't have a phone number to call. How can I contact them?
I sent an email, but I really need to work this week. I bought the wood for the bench, it is ready and I am at the point to start the assembly.
I only have this week to do it.

It is my bad luck I guess.

If you have the phone number, could you share it?

[Derek Cohen]

Hi Fidel

Is it possible to reduce the steel on the shaft with sandpaper to fit the hub? I would do this as if polishing a shoe. As long as they go together they will be good.

Regards from Perth

Derek

[Fidel Fernandez]

They just called me. They will send the parts.

[Fidel Fernandez]

I did that. I made it fit. There was a little metal inside of the hub too.

Hi Fidel

Is it possible to reduce the steel on the shaft with sandpaper to fit the hub? I would do this as if polishing a shoe. As long as they go together they will be good.

Regards from Perth

Derek