This is a Super Shop, basically a Shopsmith on steroids. It will even mill aluminum or brass, they tell me.
I bought it a couple years back to play around with. Never used it yet, as the wheels were installed backwards and I could not move it around very well, so it got put on the back burner. Tonight I finished reinstalling the wheels. I had it up on blocks about 4", and when I tried to lower it with my floor jack, I must have gotten it off center. It is super heavy, and it's all up high. I lifted it off the blocks on one side about a quarter inch, removed the blocks, and it started leaning. I grabbed it, but it made no difference at all, down it went.
Luckily, I had enough room to squeeze backward as it went over, and it only took a chunk out of my hand. I was standing in that small space to the left of the pic, between the band saw side and the shelf unit. I don't know what damage I have done, can't see any from this view, and I need a couple big guys to help me get it up
More proof that God watches out over idiots.
P9220063.jpg
P9220062.jpg
Rick Potter