[OP]
Member
Can anyone help me please . My laser cutting point seems to have split at the job point I get a single point where it cuts and I also get a little half moon burn point next to cutting point. any ideas please.
Problem fixed. After going back to basics Iand checking focus and mirror cleanliness I found a loose mirror.
Last edited by Ross minetti; 09-20-2014 at 11:50 PM.
Jiangsu Keyland Laser KQG 100w 1090 Lots of woodworking toys rc planes and cars and tanks and I wish I had a rc 2 1/2 yr old who when then do what I want not the other way around
Member
Way to go, it sounded simple!
Robert
Robert Tepper
Trotec Rayjet 300/80 Watt
Dahlgren 500 Engraving Machine, CNC Engraving Machine
Pad printer with 5 3/4 x 5 3/4" print area
Jackson Vulcanizers, 15 x 24", three total
Hegner Scroll Saws, 14", three total
Posting Permissions
Reply With Quote