This is my first cribbage board. 1/4 sawn sycamore and has peg storage on one end.
All C&C welcome. Cribbage0008.jpgCribbage0013.jpg
i got the jig off Ebay.
Quinn
[OP]
In Memoriam
This is my first cribbage board. 1/4 sawn sycamore and has peg storage on one end.
All C&C welcome. Cribbage0008.jpgCribbage0013.jpg
i got the jig off Ebay.
Quinn
Contributor
Nice job Quinn your first of many I bet.
If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine
Lasercut 5.3
CorelDraw X5
10" Miter Saw with slide
10" Table Saw
8" bench mount 5 speed Drill Press
Dremel, 3x21 Belt Sander
Contributor
Nice work. It takes a lot of patience and attention to drill all those holes so accurately. I love the look of nicely crafted sycamore.
Moderator
That's a lot of holes!
Very nice!
"It's paradoxical that the idea of living a long life appeals to everyone, but the idea of getting old doesn't appeal to anyone."
Andy Rooney
Contributor
Nice work. All the holes look lined up perfect. Did you drill with a regular twist drill bit and a drill press?
[OP]
In Memoriam
Thanks for all the great compliments.
I used a twist bit on the drill press. I secured the template on the first won with clamps and that worked so so. Second one I used HD double faced tape and that worked much better. There was a little more sanding around the foles but it kept the area under the DP quill more clear. I have ordes for 2 more so I am going to make 2 extra. ANother one in sycamore, 1 in spalted hackberry and 2 in siberian elm.
Thhanks again.
Quinn
Posting Permissions
Reply With Quote