Results 1 to 3 of 3

Thread: A nice design for a pedestal table

  1. #1
    Join Date
    Feb 2010
    Location
    Adjacent Peoples Republic of Boulder
    Posts
    492

    A nice design for a pedestal table

    We need a kitchen nook table and it will be right adjacent the bar-height section of counter across from the sink, so I thought we would do the table at that same 42" height, with 30" chairs.

    Saw an idea in an Amish furniture store. See pic. The leg array is essentially a pedestal, with the legs inside enough to not foul your legs or knees when seated or getting on and off the seat. We tried it out in the showroom to verify.

    Legs are 2-1/4" thick.

    Will build it in soft maple or whatever I can get that is available in the 12/4 material needed for the legs.
    Attached Images Attached Images

  2. #2
    Interesting design.

    Why a screen shot?

  3. #3
    Join Date
    Feb 2010
    Location
    Adjacent Peoples Republic of Boulder
    Posts
    492
    It is up on the 3D Warehouse now.
    Attached Images Attached Images

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •