I'm trying to engrave and cut some game pieces for a friend on 1/8" plywood. The design has raster fill, vector outlines, then vector cut shapes. I have set the file up for color mapping using blue for the rastering, green for the outlines, and red for the cutting. I have triple checked that all of the colors used are 255 for the primary color and 0's for the other two colors. I have the color mapping to raster, outline, then cut. When I run a test file of one of the game pieces, it rasters fine, then quits. I have made sure that all of the vector lines are 0.0069 inches wide, so they should be outputting as vectors. I have tried moving the vector processes up in the order, and I have deleted the unused colors from the color map. Does anybody know why it wouldn't be outputting the vectors?