Tailstock turret tool holder

[Mark Eisen]

Has anyone used one of these tailstock turret?


The idea looks good to me but I was wondering how you make sure the tool you were using was lined up properly to the head stock?














www.google.com/imgres?imgurl=http%3A%2F%2Ftooling.sterlingmachine ry.com%2Fmedia%2Fcatalog%2Fproduct%2Fcache%2F1%2Fi mage%2F9df78eab33525d08d6e5fb8d27136e95%2F3%2F9%2F 3900-4909b_3.jpg&imgrefurl=http%3A%2F%2Ftooling.sterlin gmachinery.com%2Findex.php%2Fmachine-tool-accessories-workholding%2Ftailstocks%2Fmt3-tailstock-turret-tool-holder-5-8-inch.html&h=269&w=600&tbnid=RBEDEHTz87rBSM%3A&zoom =1&docid=YDbpwtl3i6TaJM&ei=HvQ4VPWrG8_hoASW5YLwAw& tbm=isch&ved=0CB4QMygAMAA&iact=rc&uact=3&dur=2738& page=1&start=0&ndsp=9






www.google.com/imgres?imgurl=http%3A%2F%2Fwww.micro-machine-shop.com%2Fturret_1.jpg&imgrefurl=http%3A%2F%2Fwww .micro-machine-shop.com%2F9x20_centers_drill_chucks_arbors_access ories.htm&h=480&w=640&tbnid=KzqkvBomt7ojGM%3A&zoom =1&docid=VweCUunGTWFw8M&ei=HvQ4VPWrG8_hoASW5YLwAw& tbm=isch&ved=0CFwQMyg0MDQ&iact=rc&uact=3&dur=608&p age=5&start=41&ndsp=16

[Bruce Page]

I have used them, they work. You have to mentally keep track of where the bits are or you can rip your arm open. DAMHIKT!

[Mark Eisen]

Never thought of that, guess you remember after hitting it a couple of times.

[Bruce Page]

Never thought of that, guess you remember after hitting it a couple of times.

It only took me one time.

I was working in a small production job shop where time was money. Every one of the smaller lathes had one of these set up. I wasn’t the only one sliced open, I saw it happen 2-3 times in the short time I worked there. I wondered how much time the shop owner was really saving with them.